IP67 Waterproof Digital Calipers.
Code: 1118
Button function: zero, on/off, mm/inch, ABS/REL, hold
Battery CR2032
Meet DIN862
Made of stainless steel
INSIZE 1118 SERIES SPECIFICATIONS
| Code | Range | Accuracy | Resolution | Data Output |
|---|---|---|---|---|
| 1118-150B | 0-150mm/0-6" | ±0.03mm | 0.01mm/0.0005" | Without data interface |
| 1118-200B | 0-200mm/0-8" | ±0.03mm | 0.01mm/0.0005" | Without data interface |
| 1118-300B | 0-300mm/0-12" | ±0.03mm | 0.01mm/0.0005" | Without data interface |
| 1118-150R | 0-150mm/0-6" | ±0.03mm | 0.01mm/0.0005" | Without data interface |
INSIZE 3108 Series | IP65 Waterproof Digital Outside Micrometer
Elevate your measurement precision with the INSIZE 3108 Series. Engineered for industrial environments, this digital micrometer features IP65 waterproof protection and a high-accuracy 0.001mm/0.00005″ resolution. Equipped with carbide measuring faces and an automatic power-off function, it ensures long-term durability and efficiency for any engineering task
INSIZE 3108 Series Digital Outside Micrometers
| Code | Range | Accuracy | L (mm) | b (mm) |
|---|---|---|---|---|
| 3108-25A | 0-25mm / 0-1" | ±2μm | 34.5 | 25 |
| 3108-50A | 25-50mm / 1-2" | ±2μm | 59.5 | 32 |
| 3108-75A | 50-75mm / 2-3" | ±3μm | 84.5 | 44.5 |
| 3108-100A | 75-100mm / 3-4" | ±3μm | 109.5 | 57 |
Key Features: IP65 Waterproof, 0.001mm Resolution, Carbide Measuring Faces, Automatic Power Off.
Dial Test Indicators
Code: 2380/2381
Meet DIN2270 (except 2380-02, 2381-02, 2381-021)
Jeweled bearing
Carbide contact point
Two measuring directions
Supplied with two clamps: diameter Ø4mm and Ø8mm
INSIZE Dial Test Indicator Series
| Code | Range | Accuracy | Graduation |
|---|---|---|---|
| 2380-05 | 0.5mm | 13µm | 0.01mm |
| 2381-05 | 0.5mm | 13µm | 0.01mm |
| 2380-08 | 0.8mm | 13µm | 0.01mm |
| 2381-08 | 0.8mm | 13µm | 0.01mm |
| 2380-02 | 0.2mm | 6µm | 0.002mm |
| 2381-02 | 0.2mm | 6µm | 0.002mm |
| 2381-021 | 0.2mm | 6µm | 0.001mm |
DLC Coated Thread Ring Gages and Plug Gages
DLC COATED THREAD RING GAGES AND PLUG GAGES
- The DLC coating has the following advantages:
- High hardness, extremely wear resistance
- Low friction coefficient
- Corrosion resistance
- Plug gages: GO is coated, NO-GO is not
- Ring gages: GO is coated, NO-GO is not
- The following thread ring gages and plug gages are available with DLC coating:
Metric thread ring gages and plug gages (4130, 4120 series)
Metric fine thread ring gages and plug gages (4139, 4129 series)
American standard thread ring gages and plug gages (4131, 4121 series)
DLC coating characteristics
| Hardness | 6000HV |
| Friction coefficient | 0.15 |
| Coating color | interference color |
Code example
| Original code | DLC coating code |
|---|---|
| 4120-12 | 4120-12-DLC |
| 4130-4 | 4130-4-DLC |
